Exploro RaceMax Frame
Exploro RACEMax EKAR 1x13 700c
Exploro RaceMAX Ekar 1x13 650b
Exploro RACEMAX FORCE AXS 1X 700c
Exploro RaceMAX EAGLE AXS 1X 650b
Exploro RACEMax FORCE AXS 2X 700c
Whether riding road or gravel, we love speed. So everything on the RaceMax frame is engineered for that. The end result is the first gravel bike that:
Best of all, the very same RaceMax frame can be built up with a focus on pure speed with 35-42mm WAM tires in 700c can also be turned into an unstoppable machine with very wide tires p to 61mm WAM. Handy for that epic ride or trip abroad. And with two wheelsets, you can switch between the two setups easily. That’s RaceMax.
To make the fastest possible gravel bike, you need to start with the tire. Tire choice determines comfort & grip. But it also determines how you can shape the frame to redirect the airflow.
To aerodynamically engineer the frame around the tires, you need to know what their REAL measurements are. Not what’s on the label, but how they really fit. That’s REALFAST aerodynamics. But it’s not easy, as the tire dimension depends on the rim you use, the pressure and of course how accurate the manufacturer’s claimed size is.
Starting from our favorite tires, we then engineered a perfectly fitting rear wheel cutout (with mud clearance of course) and a closely trailing downtube to catch the airflow coming off the front tire. We added a super-narrow headtube (yet with a big steerer inside it), a multi-shape fork and aero details from seatstay to seatpost and from the shielded water bottle to the direct-attachment brake mounts.
Most importantly, we engineered this for realistic riding speeds, wind speeds, tire widths, bottle positions and even for mud. We don’t care if it is theoretically fast in the windtunnel with a fantasy spec. We care if it is fast the way you ride it in real world conditions.
The RaceMax frameset is is fastest with 35-42mm WAM tires. That’s when its top speed rivals the best road bikes out there. So whether you’re on asphalt, easy or tougher gravel, you can be sure you have the fastest setup. But depending on where you ride and how fast you ride, you may want an even bigger tire for ultimate traction and control. Good news: 90% of the aerodynamic advantage of the RaceMax frameset still works with tires up to 61mm WAM.
In a way, the Ultra is the reverse. It is aerodynamically optimized for 55-61mm WAM tires thanks to its wider downtube near the front tire. This extra width better redirects the air coming off a bigger front tire. If you prefer a smaller tire, you can run a 700c tire up to a 46mm WAM. But as you go to a smaller tire, the Racemax becomes the faster choice again. In addition, the Ultra combines its aero seattube with a round seatpost so you can fit a standard, dropper or suspension post.
PERFECT AERO CUTOUT: Close-fitting cutout to shield the rear wheel and achieve the most speed.
MIND THE GAP: No oversized gaps between front tire & downtube for better airflow transition and less turbulence.
HUGE CLEARANCE: The original Exploro set today’s standard for up to 54mm tire clearance. The RaceMax has up to 61mm!
75MM DOWNTUBE BASE: Lower downtube aero profile is 75mm wide to fully shield water bottle.
50MM DOWNTUBE NECK: Upper downtube necks down to 50mm to pick up the airflow coming off the front tire.
SIZE-SPECIFIC DOWNTUBE: Reduced depth on smaller sizes to keep frame compliant and keep space for bottles.
NARROW HEADTUBE: Headtube is sized like a road bike for a small 1 1/4” steerer for optimal aerodynamics.
BIG STEERER: Inside that narrow headtube is a big 1 1/2” steerer for best strength and stiffness.
MINMAX HEADSET: To fit this big steerer inside the narrow headtube, we use the custom MinMax headset.
MINIMALIST CROWN: Fork crown shapes haven’t changed much since brakes were attached there. Now that we have disc brakes, we don’t need that bulk of material and can reshape the crown for better strength, stiffness and weight. Plus better aerodynamics.
PURE-ROAD FORK LENGTH: With the shorter crown, we can make our forks 25mm (1 inch) shorter than other gravel bikes. Exactly the same as a road fork. This offers better stiffness, lower weight, an easier steering geometry and better aerodynamics.
DOUBLE-DROP CHAINSTAYS: Dropping the drive-side chainstay improves tire & crank clearance. Dropping the other side as well creates a much more efficient structure behind the BB for higher stiffness & strength as well as lower weight.
THREADED BB: Most of our complete bikes come with threaded BBs for the best alignment and to avoid any issues. Yet we avoid gluing threaded alloy rings into the carbon (added weight, complexity and debonding risk). Read more here.
DIRECT-MOUNT REAR BRAKE: Standard frames require an adaptor to use a 160mm brake rotor. We have integrated that into the frame, meaning you don’t need any extra pieces to attach the brake.
DIRECT-MOUNT FRONT BRAKE: Standard forks require a flip-flop adaptor to set the correct brake rotor size. Our direct-mount pre-sets the caliper for 160mm rotors without any extra pieces.
INTEGRATED FENDER MOUNTS: Invisible until you need them. Perfect for our custom fenders.
SELF-ALIGNING WEDGE CLAMP: Self-adjusting bolt angle for higher clamping forces with lower torque.
RITCHEY RAIL CLAMP: The new standard for gravel bikes, available for round and oval rails.
|Rider Height* (cm)||145-|
|Rider Height* (inches)||4’9”-|
* Rider heights are approximations. For more accuracy, compare stack/reach with your current bike or visit your 3T retailer.
** RaceMax FORK length is equal to a standard road bike, so this HEADTUBE length can be compared to road bikes. To compare to gravel bikes with standard gravel forks, deduct 25mm from these “road" headtube lengths for a proper comparison.